Novi HiendFi proizvodi

Usher CP-777 diamond

Tue, 10 Mar 2009 12:51:51 +0100

Forma koja sledi funkciju, slogan koji nije lako razumeti dok se sa ovim zvučnikom ne susretnete uživo. Specifičan dizajn koji omogućava optimalan položaj driver-a rezultirao je zvučnom kutijom koja donosi tonsko bogatstvo, dobar odziv tranzijenata i superiornu dinamiku. Iako najmanji u Dancer seriji, model CP-777 težinom od 33 kilograma, osetljivošću od 90db, i bas frekvencijama koje sežu do 35 Hz predstavlja zvučnik koji će biti ozbiljan partner širokom rasponu kvalitetnih pojačala.

Konstruktori su kod ovog modela vodili računa i o eleganciji kabineta, koji osim upečatljivog vizuelnog efekta, smanjuje nepoželjne vibracije na minimum. Kompletna Usher serija zvučnika je osvojila prestižnu CES Jimmy Awards 2005. na Sajmu elektronike u Las Vegasu; objašnjenje je da Usher zvučnici svojim kvalitetom i cenom prkose logici. Usher CP-777 je svakako jedan od primera da savremeni audifili imaju prilike da uživaju u takvoj logici vrhunskog zvuka, izuzetnog dizajna i niske cene.

Features

2-way system : Diamond DMD dome tweeter 1.25"
woofers 7"x 2 (8948A)
sensitivity: 90 dB @ 1 watt / 1m
nominal impedance: 4 ohms
frequency response (-3 dB): 32 Hz ~ 40 kHz
power handling: 100 watts
crossover frequencies: 2.74 kHz
weight: 36.9 kgs
dimensions (w x d x h): 31.6 cm x 59 cm x 64.7 cm

{phocagallery view=category|categoryid=9|
limitstart=1|limitcount=1|detail=0|displayname=0|
displaydetail=0|imageshadow=shadow0 }

shipping weight: 40.2 kgs /pc
shipping box(w x d x h): 42 cm x 68 cm x 76 cm

Available Finishes

An unusually handsome speaker beloved by many design-conscious music lovers, the CP-777 continues its legacy into the future, now hosting the new Diamond DMD tweeter. An exercise in design and craftsmanship, paired with cutting edge speaker technology, the CP-777 is an absolute joy to own, to admire, and to enjoy.

Usher Products Brochure	Loudspeaker Owners Manual

BE-616 diamond

Sat, 21 May 2011 01:23:05 +0100

Features

2-way system : Diamond DMD dome tweeter 1.25"
mid-low woofer 7" (8948A)
sensitivity: 90 dB @ 1 watt / 1m
nominal impedance: 4 ohms
frequency response (-3 dB): 44 Hz ~ 40 kHz
power handling: 100 watts
crossover frequencies: 2.8 kHz
weight: 23kgs (including base)
dimensions (w x d x h): 64 cm x 39.5 cm x 25.4 cm

{phocagallery view=category|categoryid=47|limitstart=1|limitcount=1|detail=0|displayname=0|displaydetail=0|imageshadow=shadow0}

shipping weight: 25.8 kgs /pc
shipping box (w x d x h): 71.5 cm x 44.5 cm x 37 cm

Available Finishes

Usher Products Brochure	Loudspeaker Owners Manual

Usher Be-718 diamond

Tue, 10 Mar 2009 15:54:59 +0100

Features

2-way system: Diamond DMD dome tweeter 1.25"
mid-bass7"(8948A)
sensitivity: 87 dB @ 1 watt / 1m
nominal impedance: 8 ohms
frequency response (-3 dB): 42 Hz ~ 40 kHz
power handling: 80 watts
crossover frequencies: 2.06 kHz
weight: 17.2 kgs
dimensions (w x d x h): 25.8 cm x 42.8 cm x 38.7 cm

{phocagallery view=category|categoryid=30|limitstart=1|limitcount=1|detail=0|displayname=0|displaydetail=0|imageshadow=shadow0}

hipping weight: 18.75 kgs /pc
shipping box(w x d x h): 61 cm x 48.5 cm x 48 cm

Available Finishes

Simply the most accurate and musical bookshelf speaker money can buy, period. Exquisitely designed, executed and manufactured, the BE-718 has won numerous awards since its launch. Equally at home as a studio monitor, in a high end stereo system, or teamed up with the BE-616 center channel speaker in a home theater, the compact BE-718 Diamond is a versatile speaker which every family should have at least a pair.

Take a look below at the long list of awards the BE-718 has under its belt:

Reviews

Usher Products Brochure	Loudspeaker Owners Manual

Dancer Mini-Two diamond

Fri, 20 May 2011 01:10:58 +0100

Features

2-way system : Diamond DMD dome tweeter 1.25"
mid-low woofer 7"x2 (8948A)
sensitivity: 90 dB @ 1 watt / 1m
nominal impedance: 4 ohms
frequency response (-3 dB): 28 Hz ~ 40 kHz
power handling: 100 watts
crossover frequencies: 2.7 kHz
weight: 57.5 kgs (including base)
dimensions (w x d x h): 34 cm x 50 cm x 123.7 cm

{phocagallery view=category|categoryid=46|limitstart=1|limitcount=1|detail=0|displayname=0|displaydetail=0|imageshadow=shadow0}

shipping weight: 42 kgs /pc (including wood crate without base)
19.5 kgs /pc (base)
shipping box (w x d x h): 35.5 cm x 61 cm x 130 cm
(including wood crate without base)
40.5 cm x 58 cm x 10.5 cm (shipping base)

Available Finishes

The newest members to the Dancer family, the Mini-One and Mini-Two have proven themselves to be worthy of the Dancer name, each having won a major award shortly after their debut. For those who don't have the space or budget for the bigger Dancers, but prefer a self-contained floor-standing system, the Dancer Mini-One and Mini-two are the answer.

Review

Usher Products Brochure	Loudspeaker Owners Manual

Dancer Mini-One diamond

Thu, 19 May 2011 00:44:05 +0100

Features

2-way system : Be dome tweeter 1.25" (9980-20BEA)
mid-low woofer 7" (8948A)
sensitivity: 87 dB @ 1 watt / 1m
nominal impedance: 8 ohms
frequency response (-3 dB): 38 Hz ~ 40 kHz
power handling: 90 watts
crossover frequencies: 2.3 kHz
weight: 37.3 kgs (including base)
dimensions (w x d x h): 32 cm x 40 cm x 106.2 cm

{phocagallery view=category|categoryid=45|limitstart=1|limitcount=1|detail=0|displayname=0|displaydetail=0|imageshadow=shadow0}

shipping weight: 26.4 kgs /pc (including wood crate without base)
15 kgs /pc (base)
shipping box (w x d x h): 35.5 cm x 45.5 cm x 118 cm
(including wood crate without base)
40.5 cm x 47.5 cm x 10.5cm (shipping base)

Available Finishes

Review

Usher Products Brochure	Loudspeaker Owners Manual

Rega Brio-R

Wed, 18 May 2011 00:52:30 +0100

Features

50w RMS pc into 8W
73w RMS pc into 4W
Remote control
5 inputs
Rega brand new custom manufactured case.
Rega phono stage (Input 1)
Toroidal mains transformer
Sanken 150w output transistors
Finishes available:

Black

Silver

Brio-R manual

The Brio–R embodies all the necessary ingredients. Substantial toroidal transformer, generous power supply components, rugged output stage, the use of film capacitors in the signal path and at all critical positions within the phono amplifier.

New output amplifier

Developed by our engineers a newly designed output amplifier using a low source impedance emitter follower Class A driver stage. Based around a complementary pair of 150w Sanken Darlington output transistors, this combination forms a complementary emitter follower emulating Class A conditions with good thermal stability and lower standing currents in the driver stage.

Remote Control

Remote control has been added to the Brio-R without compromising the sonic design of the amplifier. This was achieved by keeping the remote circuit separate to the audio circuit and having its own dedicated power supply.
There is no direct contact between the micro-controller and the signal path, the micro-controller controls the relays whilst the volume control motor uses DC control voltages.

High quality components

The Brio-R utilises the highest quality components and our engineers' experience to achieve the best sonic performance.
Ensuring it is the most advanced and feature packed Brio to date.

Improved power supplies

During the Brio-R design process Rega reviewed the circuit and improved the low and high current power supplies, coupling and bypass capacitors. The phono stage has been improved to reflect the current improvements in the Rega Planar turntables, where the input sensitivity has been increased along with a revision of the sub 100Hz part of the phono frequency response.

Custom Case & Design

Housed in a brand new custom case the Brio-R draws on the pedigree of the previous three incarnations of this model.
The sonic recipe for the Brio-R embodies the best in traditional audio circuits with excellent engineering practice.

Rega DAC

Wed, 18 May 2011 00:33:47 +0100

Features

16-20-24-bit at 32kHz to 192kHz digital to analogue conversion.
Five user selectable digital filters.
Two isolated Co-axial inputs, two Toslink SPDIF inputs & Isolated USB input.
Input stage comprising of a Wolfson digital receiver with a high stability low jitter clock.
Jitter minimised by synchronously clocking the digital data with our receiver PLL.
A pair of parallel-connected Wolfson WM8742 DAC's, which are driven via a buffer stage, a similar configuration to that used in the Isis CD player.
Output amplifier with a discrete differential multiple feedback filter and output amplifier.
Housed in a brand new custom steel & aluminium case.
Finishes available:

Black

Silver

DAC manual

Maximise the potential of your digital audio.

The Rega DAC is a 16/20/24-bit at 32kHz to 192kHz digital to analogue converter incorporating an enhanced version of the Rega designed circuit. Developed to be simple to set up and use, the Rega DAC is designed to optimise performance from any two channel PCM digital audio source such as a CD player PC or streaming device.

With the PC/Laptop and MAC now widely accepted as creditable mediums for storing and streaming music. The use of high quality lossless files such as WAV, FLAC and ALAC offer performance through the DAC equal to and in some cases better than red book CD.

Housed in a custom aluminium and steel case and boasting a pair of Wolfson DAC IC's, 5 user selectable digital filters, two isolated Co-axial inputs, two Toslink SPDIF inputs and an isolated USB input. The Rega DAC is designed and engineered to perform way above its class.

Technology

The input stage comprises a Wolfson digital receiver with a high stability low jitter clock. The receiver and PLL have their own dedicated power supplies. The DAC stage comprises of a pair of parallel-connected Wolfson WM8742 DAC's, which are driven via a buffer stage, which ensures the integrity of the data being fed to the DAC IC's similar to the arrangement used in the Isis (Rega's refrerence CD player). Great care has been taken to remove noise generated by the PC and other input sources. During development this was identified as a major drawback with many DAC's on the market today.

The output amplifier employs a discrete differential multiple feedback filter and output amplifier, with a high cut-off frequency for use with higher sample rates. We decided not to use a sample rate converter and process the data at the incoming sample rate which keeps the signal processing to a minimum. Jitter was minimised by synchronously clocking the digital data with our receiver PLL (removing any jitter from the input signal).

All the capacitors associated with the analogue signal path are Nichicon FG bypassed with MMK polyester capacitors, and low impedance conductive polymer capacitors are used for DAC decoupling. The power supply utilizes a toroidal transformer, fast rectifier diodes and again Nichicon FG capacitors. There is a power supply for the control microcontroller, separate from the digital & analogue audio stages. Special attention being paid to the inter IC control signals ensuring the control data noise is kept to a minimum.

Rega RP1

Wed, 17 Nov 2010 20:33:18 +0100

The all new Rega RP1

Turntable Designed and engineered to achieve outstanding performance way beyond the expectations of a product at this price point.

Excellent build quality, reliability and ease of use combine to make a product which will offer a lifetime of musical enjoyment. Omitting all the usual gimmicks allows us to concentrate the manufacturing costs on the high quality parts necessary to reproduce records accurately.

Using a manual speed change rather than an automatic mechanism, eliminates speed inconsistencies and reduces wear of the drive belt. The money we save is spent acrxcellent build quality, reliability anoss the design including a new hand assembled RB101 tonearm, precision main bearing, phenolic resin platter and a high quality low vibration motor which would normally be used on a turntable costing two or three times the amount.

The minimalist design of the Rega RP1 and the use of extremely high quality components ensure that this turntable will last for many years. The RP1 is the first in a new generation of Rega turntables offering far greater performance than their predecessors.

We are confident the performance of this amazing new product will impress you.
Rest assured the only thing entry level about the RP1 is the price!

The all new completely British-made RP1 features:

Brand new Rega RB101 tonearm.
Precision main bearing and sub-platter assembly.
High quailty low vibration motor.
All new Phenolic resin flywheel effect platter for excellent speed stability.
Ortofon OM5e moving magnet cartridge.
Rega sound quality at an unrivalled price.

Model shown in the picture above is the 'Cool Grey' version.

RP1 turntable performance pack

Want to take the performance of your award winning RP1 turntable to the next level ? The RP1 Performance Pack can be purchased as an aftermarket kit or ordered factory fitted to your RP1 turntable.

Included in the pack:

Bias 2 moving magnet cartridge
Upgrade drive belt
100% natural wool turntable mat

Detaljne karakteristike

Performance pack flyerfor

{phocagallery view=category|categoryid=41|limitstart=1|limitcount=1|detail=0|displayname=0|displaydetail=0|imageshadow=shadow0 }

Dodatne slike Rega gramofona

Cayin A-100T

Mon, 09 Mar 2009 17:07:00 +0100

Karakteristike:

Izlazna otpornost 4Ω, 8Ω
Ukupna harmonijska izobličenja 1% (1kHz)
Frekvetni opseg 10Hz - 65kHz

S/N odnos 89dB
Ulazna osetljivost 480mV, 900mV
Ulazna otpornost 100KΩ
Potrošnja snage 280 W

Težina 29 Kg
Dimenzije 440 x 210 x 397mm

{phocagallery view=category|categoryid=8|
limitstart=1|limitcount=1|detail=0|displayname=0|
displaydetail=0|imageshadow=shadow0 }

Dodatne slike Cayin integralnih pojačavača

Rega P3

Wed, 20 May 2009 12:12:59 +0100

Karakteristike:

Dvobrzinska remenska okretnica sa AC sinhronim motorom i staklenom podlogom

RB301 ruku izrađenu od alumunijuma
Vreteno za pivot: 222.8mm
Efektivna dužina prečnika: 240mm.
Neposredni amortizeri sa korigovanje iskrivljenosti ploče

* Dodatne testove i mišljenja možete pruzeti u download sekciji.

Detaljne karakteristike

{phocagallery view=category|categoryid=39|limitstart=1|limitcount=1|detail=0|displayname=0|displaydetail=0|imageshadow=shadow0 }

Dodatne slike Rega P3 gramofona

Shanling SCD-T2000

Wed, 11 Mar 2009 12:19:48 +0100

Karakteristike:

Linijski nivo izlaza 0 - 2.0 V
Frekvetni opseg 5 Hz - 45 kHz ± 0.5 dB

S-N odnos 118 dB
Ukupna harmonijska izobličenja < 0.002 (@ 1 kHz)
Dinamički opseg 115 dB
Preslušavanje > 100 dB
Potrošnja struje < 70 W
Napajanje 240 V / 50 Hz

Sony KHM-280AAA bare head laser drive in a custom aluminium housing.
Top grade Sony CXD2753R SACD decoding IC.
Burr-Brown PCM1738 DAC (digital to analog converter) up to 24 bit / 96 kHz (SACD).
Four Burr-Brown OPA627 op-amps for I/V switching and two OPA2604 op-amps for filtering and output stages.

Dimenzije 430 x 300 x 145 mm
Težina 14 Kg

Mišljenje eksperta

6moons audio review

{phocagallery view=category|categoryid=21|
limitstart=1|limitcount=1|detail=0|displayname=0|
displaydetail=0|imageshadow=shadow0 }

RB1000

Sun, 29 Nov 2009 22:04:16 +0100

The award winning RB1000 takes almost twenty times longer to produce than an RB301. At present there are only two highly experienced technicians that can build this exotic tonearm.

A "blue printing" parts and assembly process is used resulting in zero tolerance engineered assemblies offering ultimate performance.

The bearings fit on to ground shafts and into the tonearm using interference fits. This means that no adhesive is required and therefore none of the associated (component - adhesive - component) losses in rigidity prevail. It is fitted to the plinth by a 3-point fixing which is CNC machined out of a single solid block of Stainless steel. This provides the strongest most rigid base structure possible for the tonearm and causes less stress on the plinth and the bearing housing, and therefore the least possible resonance.

The RB1000 carries more technological changes over previous Rega tonearms than any other Rega tonearm produced during the last twenty years! Key areas of improvement can be found in the bearing assemblies, wiring and materials used. We have worked to redistribute and reduce mass in areas of the tonearm where mass is critical to performance. The easiest place to see these changes in evidence would be the polished aluminium arm tube. It has no coatings of any type.

The changes made have resulted in a tonearm with extremely high structural rigidity, combining ultra low friction movement together with incredible stability. These attributes will make any cartridge mounted on this tonearm work harder than they have ever worked before. Do not be surprised if the first time you listen to familiar music, you hear detail that you have not heard before.

RB700

Sun, 29 Nov 2009 22:00:51 +0100

Fitted as standard on our P5 and P7 turntables the RB700 offers exceptional performance and build quality.

The aluminium tube has been specially coated in a unique finish whilst remaining low mass. The tonearm assembly is concentrated around precision, hardened stainless steel and miniature ball races of the highest quality. The bearings fit on to ground shafts and into the tonearm using interference fits. This means that no adhesive is required and therefore none of the associated (component - adhesive - component) losses in rigidity prevail.

It is fitted to the plinth by a 3-point fixing which is CNC machined out of a single solid block of Stainless steel. This provides the strongest most rigid base structure possible for the tonearm and causes less stress on the plinth and the bearing housing, and therefore the least possible resonance.

The RB700 tonearm is designed to make cartridges work harder, maximising the cantilever acceleration and travel as much as possible with the utmost accuracy within the cartridge body thus providing new levels of information.

RB301

Sun, 29 Nov 2009 21:56:34 +0100

Replacing what was probably the most famous tonearm in the world the legendary RB300 was always going to be a challenge. The new RB301 uses the highest quality bearings available (usually found in ships navigational equipment) both bearings vertical and horizontal are hand selected to find a perfect match with each spindle.

It uses the classic Rega die-cast arm tube and the new three point fixing based on the mounting system of our flagship tonearm the RB1000, a high performance low capacitance arm lead and plugs complete this amazing product which all combine to offer unrivaled performance for the money.

For those who have auditioned the new RB301 will know this multi award winning product will take you to the next level on musical performance with any piece of vinyl you decide to present it with.

Rega P9

Sun, 29 Nov 2009 21:21:08 +0100

The P9 is the product of twenty-five years of turntable design. This 'table, like all Rega designs, is deceptively simple. The exacting nature of the P9 requires a tremendous amount of care and effort during construction, taking fully ten times the number of man hours required to build a P3. The P9 employs a unique and exotic ceramic platter, guaranteeing a superbly precise support for the LP.

Karakteristike:

RB1000 Tonearm uses a one piece, cast silicone aluminum arm tube with stainless steel bearing housing and tungsten counterweight
Aluminum oxide ceramic platter with felt mat
Twin belt system for high torque
Massive external dual quartz electronic power supply
Low capacitance Klotz tonearm lead fitted with Neutrik RCA connectors

Dimensions:

17-5/8" W by 4-3/4" H by 14"" D, including dustcover.

Finish:

Silver satin metal finish
Black satin metal finish

* Dodatne testove i mišljenja možete pruzeti u download sekciji.

Detaljne karakteristike

{phocagallery view=category|categoryid=41|limitstart=1|limitcount=1|detail=0|displayname=0|displaydetail=0|imageshadow=shadow0 }

Dodatne slike Rega gramofona

Rega P7

Sun, 29 Nov 2009 21:19:40 +0100

Karakteristike:

Two-speed belt-drive turntables with AC synchronous motor,
pivoted tonearm with one-piece,
cast-aluminum armtube,
and ceramic record platter.

RB700 tonearm:

222.8mm spindle-to-pivot distance,
240mm effective length,
spring-actuated downforce,
sliding-magnet antiskating system.

Dimensions:

17.5" W by 4.5" H by 15" D, including dustcover.

Finish:

Black or silver alloy (turntable plinth), clear-coat aluminum (tonearm).

* Dodatne testove i mišljenja možete pruzeti u download sekciji.

Detaljne karakteristike

{phocagallery view=category|categoryid=41|limitstart=1|limitcount=1|detail=0|displayname=0|displaydetail=0|imageshadow=shadow0 }

Dodatne slike Rega gramofona

Rega P5

Sun, 29 Nov 2009 21:08:43 +0100

Karakteristike:

Two-speed belt-drive turntables with AC synchronous motor,
pivoted tonearm with one-piece,
cast-aluminum armtube,
and glass record platter.

RB700 tonearm:

222.8mm spindle-to-pivot distance,
240mm effective length,
spring-actuated downforce,
sliding-magnet antiskating system.

Dimensions:

17.5" W by 4.5" H by 15" D, including dustcover.

Finish:

Black or silver alloy (turntable plinth), clear-coat aluminum (tonearm).

* Dodatne testove i mišljenja možete pruzeti u download sekciji.

Detaljne karakteristike

{phocagallery view=category|categoryid=41|limitstart=1|limitcount=1|detail=0|displayname=0|displaydetail=0|imageshadow=shadow0 }

Dodatne slike Rega gramofona

Rega Apollo

Wed, 20 May 2009 11:57:00 +0100

Karakteristike:

Poluprovodnički laser
Dužina talasa 780nm
Max nivo linijskog izlaza 2V
Max digitalni izlazni nivo 0.5V
Digitalna frekvencija 44.1kHz

Potrošnja snage 12W
Dimenzije 435 x 100 x 270 mm

* Dodatne testove i mišljenja možete pruzeti u download sekciji.

Detaljne karakteristike

{phocagallery view=category|categoryid=37|limitstart=1|limitcount=1|detail=0|displayname=0|displaydetail=0|imageshadow=shadow0 }

Dodatne slike Rega Apollo cd plejera

Rega Mira

Wed, 20 May 2009 11:55:38 +0100

Karakteristike:

CD/Tjuner/Line 1/Line 2/Tape ulazna osetljivost: 220mV
Phono ulazna osetljivost: 2.1mV

Izlazna snaga: (230V ili 115V napon napajanja)
61W oba kanal na 8Ω
72W samo jedan kanal na 8Ω
91W oba kanala na 4Ω
115W samo jedan kanal na 4Ω

* Dodatne testove i mišljenja možete pruzeti u download sekciji.

Detaljne karakteristike

{phocagallery view=category|categoryid=38|limitstart=1|limitcount=1|detail=0|displayname=0|displaydetail=0|imageshadow=shadow0 }

Slike Rega sistema

Rega Brio

Wed, 20 May 2009 11:56:25 +0100

Karakteristike:

Phono ulazna osetljivost = 3mV @ 47KΩ u paraleli sa 100pF
Max ulazni nivo = 150mV @ 1Khz
CD, Tjuner, Linija 1, Tape osetljivost = 206mV @ 24KΩ

Izlazna snaga:
49W oba kanal na 8Ω,
58W samo jedan kanal na 8Ω,
64W oba kanala na 4Ω,
84W samo jedan kanal na 4Ω

* Dodatne testove i mišljenja možete pruzeti u download sekciji.

Detaljne karakteristike

{phocagallery view=category|categoryid=36|limitstart=1|limitcount=1|detail=0|displayname=0|displaydetail=0|imageshadow=shadow0 }

Dodatne slike Rega Brio pojačala